Spoon !

One of the group I’ve been involved is OWN (Open Wireless Network) and their

weekly workshop = where people exchange the information and the skills around Computer,

Wifi connection, and all sorts of electronics (and having usual silly chats.   🙂 )

After a while, I suddenly realized, a guy who I’ve been thinking a graphic designer was in fact

a silver-smith.  (In any trade, people using the computer devices, having the same kind of

trouble or discovering useful knack etc. to talk about).

[]

I know few Jewelry Designers though, to encounter a silversmith who is doing welding

work of silver and gold every week, is a different matter.  Since I’ve been making a kind

of  twisted wire sculptures (Link here), to which if necessary I been using lead-solder which is

not strong enough (Lead-free solder is even worse ) = I need to use proper welding.

So that, I’ve been thinking to make a Spot-welder using series connected PC power supply

(such as 30A, 12Vx3 = 36V, with huge bank of Capacitors) though, I haven’t done yet.   🙂

I also have Arc-welder though, it has to be used in the proper workshop, not in a flat.

So that, to meet well-seasoned silversmith is a good coincidence and a sign,

it must be a time to work out, long over due silver work.

[]

Photo top is a Cherry-wood Spoon which I carved more than 10 years ago thinking

to put the hands, made by a silver wire.

= Here, it was completed with the proper silver wire acquired through him.

——– (Wood carving is not necessary done by the Chisel alone.  Fretsaw, Files for

——– metal work, Drill etc etc.  The most useful tool for this kind of fine carvings is

——– a Small piece of Blade in a holder and a Sawing Needle sharpened in angle

——– = work as a minute-size round head chisel.  Work start to make tools  🙂 )

—– Why spoon ?   Why spoon has the hands ? —– I would only say “why not”. 

Spoon can be a Female Figure as well, hence it got hands.  I make something

with joke = I don’t like ostentatious, typical art-like art.  😉

If I see a wood, I carve it with my chisel. That’s all. That’s how creativity works.

To create something, there is no reason or explanation needed. It just happen !

In fact, this wood had happened to come from a cherry stump left in a garden. —– When I

removed it with my hatchet, I found it is a good wood to carve = so I carved it.

It occurred just as coincidence.  I take a coincidence as a given opportunity.

( —– In the mountain, often I needed to make a spoon but this was the first time I ever

carved nude figure = I learned a lot about sculpture and it opened new field to me.  😀 )

[]

  So, this photo is yet another Cherry wood Spoon.

  In fact, it was the last remaining wood, top end of the stump,

 hence the head part was cracked off, and I left her as it is.

 I liked this, as it showed an unexpected fate.

 In the carving, half of the design was the idea of the

 sculptor though, the wood itself determine the rest.

 The reason why this nude figure putting her hands there was

 = the wood had a hole in the left chest.

 In order to hide the hole, left hand had to come there = and

 right hand was placed in symmetry. (Click photo to enlarge)

In wood carvings, we can’t go back.  Once chiseled off.  That’s the end.

While carving without a model, I wasn’t sure of her back shoulder —– I’ve carved again

and again feeling not quite right hence, originally planed rather chubby figure shed a

fresh and getting thinner and thinner, ended up like this.

Still I wouldn’t complain the end result, as the shape came in its own.

[]

Our life is the same. = Want to live in such a way, was what we had wished.

Though, the actual figure was shaped by the external event and the condition

etc. etc.  Once chiseled-out, no one can glue it back and re-do.  Only one LIFE.

So, that the final work is the interaction of two or more forces which makes it even more

unpredictable, hence adding even more fun to live a life.  😀

[]

Keep clear eyes to see the flow of happening — If it was [Unpredicted], it

might be happened as [It should happened] = no time for Regret or

Resentment to dowel the past = The matter is What the next move is ? 

Cracked-off head told me  [Not cling to a crèche = Free the Mind].

This is what the LIFE is.

[]

Shallow Focus — Pan Focus (with tilting lens)

Some sharp eyed reader quizzed me, the photos of Dandelion seed are odd on previous post.

Very good eyes and the knowledge on photographic image !  —– So, I reveal the trick behind.

There is no such things [Lens Rivers Adapter for Canon EF lens].

But it is just a lens mount ring with a male filter thread on the other end.  That’s all.

If Canon is not selling,  make it ourself.   Why not  😀

Anyone can put two together with glue !   What’s the hands for ?  (not much brain needed ) 😀

But to make it,  I wouldn’t just glue together straight —– I glued them in 40 degree in angle !

(I wanted to make it 45 degree though, it was too much, and caused image-cut off = I had to

compromise though, the photo is using the image to the edge, quality became pretty low )

—– With this tilted lens, Focused field is 80 degree in angle to the camera = much easy to have

a light and able to creates Pan-Focus effect.  (Photo above, Left)

But, when it was tilted to the opposite angle,  focused field is perpendicular to the object, hence

it shows very shallow focus and exaggerated off-the-focus “Boke“.  (Photo above, Center)

[]

In fact, I’ve been using this Pan-Focus effect since I created Yoshi-Handy and Conica-Tilt

40 years ago, long before Canon TS lens. (You can see both cameras in an old post = Link here)

unlike this Tilted Revers Ring on 5D,  Conica Tilt gave a Pan-Focus from lens front to infinity.

———————- (Without the Lens lock pin, lens was secured by a crow inside, operated by the top-left round lever)

———————- (Incidentally, the Iris was automatically operated by a solenoid on the moment of shatter release)

To have a pan-focus to infinity in one shot, one side of the lens has to sink into the camera body,

so that, the camera front had to be Huck-sawed,  giving a margin of lens movement.

(See the inside detail in a photo right —– to do this kind of work = to prevent the camera

mechanism jammed by the metal dust, all the mechanism had to be removed

= it’s mean, camera had to be completely disassembled and made it to an empty shell).

[]

With this modification, lens can tilt 30 degree max, and one side of the lens is effectively

extended 18 mm = with such extension  to 15 or 16 mm lens meant, it is effectively

life-size macro !   (As I was an original member of  PCW (Personal Computer World Magazine,

until they were bought up by I.P.C) this tilting lens camera enabled to produce a photo 

“Foreground  is a CPU chip, and background is the computer company’s building, in one shot”)

[]

I’m planning to make yet another lens tilting camera using Canon 5D body (though, I have to

do its hack-saw work without disassembling the camera body   😀  )   May be I Just Do It. 

( It is a Zen in ACTION !   With open-minded way, there is no prohibition.  Only, Do the best  :-))

This is a photo of a Canon EOS Body.   Although this is the Body of EOS RT,  as most of the

camera designer in the same company are using the same layout of  the mechanism, even

using the same frame die-cast,  (since the position of Switch, lens-lock-pin are all same)

it wouldn’t be so different on 5D body.  = to modify the body to tilting-lens body only needs

to remove the metal frame marked between yellow stickers. ( —– in theory.   😀 )

[]

How shallow the Focus can be

This is yet another attempt to create  [Not necessary sharp nor pretty photos] and in here

they are the technical samples.

Lens used was Canon EF 28mm F2.8 but mounted on Canon 5D with Rivers Adapter.

As electronically there is  no connection to the body, F-aperture was fully opened  F 2.8.

And this is not purposely designed Macro Lens  (Macro Lens was designed to give the best

performance at  1/10  of Magnification ratio = if it was 50 mm lens, at the distance of 50 cm

to the object), with fully opened F-aperture, image quality is no way near to a sharp image.

With popular belief, you may be thinking that the Wide-angle lens has deeper depth of field. 

This is only true to the Object side, but not to the image side. 

Think, —– 50 mm lens needs to move 5 mm forward from infinity position to focus 50 cm

distance, but for 28 mm lens, from infinity to 28 cm object (at 1/10),  it needs only 2.8 mm shift. 

In other words, if lens was used in reverse direction, depth of field would be even shallower,

and the out-of-focus image, “Boke” would spread much wider, as you can see in the photos.

But, whether it has any significance to the photography is a matter of individual taste.  😀

The reason why I’m showing this is, this optical effect is a sanctuary in the photography,

away from a hand of Photoshop,  unless a photo was completely repainted pixel by pixel with

human brain.  Make a photo looks sharper is easy but very difficult to reproduce 3D “Boke”.

If anybody think otherwise, Please send me the Sample = Before and After, created by Photoshop.   😀

[]

Delusion or Common Sense

In a good sense, we human is a very creative people by which it had lead the

advancement of our civilization.

In the same time we are the most deluded creature on the earth.

What is common between creative and deluded is, its thinking process, think beyond the fact

which was known or widely accepted, or believe to be exist, or true.

Our cognition and its assessment of the fact are always following after the event or encounter.

To compensate this time-rug, our judgement is projecting time ahead.

In another word, speculative.

—– When you see a cockroach running on the floor, you wouldn’t hit the place where it WAS, but

look under the bed where it has disappeared. —– and put a cockroach trap expecting if it comes

again, the trap should catch it.

[]

Audiophile is the people who is the most speculative kind of people apart from the delivertive

or commodity trader 😀 —– of cause, they would say, it is not a speculation but

the fact of what their ears hear.   Here, fundamental speculation is that they are

believing their ears are correct. —– Once I was an audiophile (in meager scale 😀 ) hence,

I tested Audio-amp, Class A, B, AB etc with different transistor etc. ( On the end, I was convinced

that it would be fruitless attempt which never able to achieve the quality of live music = I decided to

listen the original sound at the original place where the recording was made = so, I came to Europe.)

[]

Time to time, people asking me to repair their audio amp.   In most of the case it was a kind,

a professional repairman has forsaken, such as a transistor had been exploded hence the name of

component was lost (and it would be too expensive to ask the maker to give a service, if they still

exist at all, but often not — in such case, analyze the circuit and find what to replace it best)

So, I have ample experiences to see the realities in the audio amp design = how far it is, from

the belief or deluded wishful thinking of the people buying it. = It is a fraud.

( Go too deep into the technical detail is not in an aim of this blog. So, I’ll show a point in a level of

secondary school common sense —– I think you can understand)

——————————————————————————————— (Photo right/ Yellow mark pointing burnt out track )

A photo above is said to be a car audio amp for sub-woofer speaker. Apparently, it was solidly built

hefty amp which is saying 500 W ! — Who believe it ? (obviously a man who bought it did )

To use an audio amp in the car, the power is a car battery which is 12 V.

Every body remember, the Ohm’s Law which I learned in the secondary school Physics, they are

few lines of very simple formula like as [ R x I = V, hence V/I = R and V/R = I ] V=Voltage,

R=Resistance, I=Current.   And in addition [ I x V = W ] W=Wat.

(In fact, it is more of the definition. The unit were defined as it is. = from 1 V source, the current

run through 1 Ohm wire was defined as 1 A —- I admire the scientist who measured then).

[]

As a car audio amp, the supply Voltage is 12 V.  = To out-put 500 W, the amp needs to draw

500/12 = 42.6 ( A  ampere ) —– though, a fuse fitted was mere 15 A.

Assuming, the amp was able to draw 15 A without blowing the fuse.  = 12 V x 15 A = 180 W.

—– within safer operation, it may not more than 150 W.   Then, to consider the efficiency of any

electric devises, they never be 100 %.   In a case of audio amp = every body knows, the amp is

getting quite hot = the power was wasted to make heat = and that was why this amp has such heavy

heat-sink and needed to make it so solid. But this amp is designed rather new Class G like design (but

without having additional power supply line) —– so, the out put power is 120 W  in its best.

—– still the person who was using this amp has been enjoying to be a proud owner

of what he believed to be 500 W car audio system.

[]

It is more like a religion.  It was out of school level common sense though, is it a matter for him ?

—– Like a people, believing so-called power of crystal with pretty happy feeling, “what is the truth”

may not be a matter for them.   Feeling happy might be more important. —– Is it ? ? ?

Pretty picture on a sham-doctor’s beauty potion might give better dream than the truth in reality.

After all, we human is a people living on the dream.   Even a placebo effect of false

belief still able to give some positive results.  What’s wrong to be deluded ? ? ?

The question is should I tell the truth what is the real power of this Amp ?

Keep him happy or make him wiser ?   (Good question ! )

[]

Humble Lens (?) for Canon Camera = Pinhole Photo / BGR Tri-Pinholes Photo

You might think the Photo here is yet another bloody Soft Focus lens.

It’s not by Soft Focus lens. —– In fact it was not even a lens at all.

——– ( Like latest  5D Mk-III,  5D Mk-II also has Light-leak or it might have caused by the internal reflection

———  on a shiny surface of a parts.   Canon can say, it is not in a normal use what camera was designed for)

This is a Pinhole Photograph on Hi-Tech DSLR —– ! ! !

You might be surprised —– or bemused ?

(End of this post, you can see  3-pinhole photo with BGR color-filter for each pinhole )

—————— ( Cutty Sark in Greenwich —– Hand held Pinhole camera, F250, 1/15th Second, ISO 3200 )

One of the best advantage of the Canon EOS cameras is, their Light-measuring

function works  without any lens attached on the body. = Light was

measured on the light actually came into the sensor, and the exposure value

was calculated on So-called Stop-down Metering.

In comparison, other cameras are guessing the exposure based on the

information came from the lens, mounted on the camera. Its mean, their

camera was designed to work only with a ROM memory hidden inside of the

lens which gives the information of lens ID, what is the current setting of

focal length on Zoom, F-aperture setting (in a case such as Nikon which allow

you to use an old manual lens) etc, with an assumption of the lens would

work accordingly.  (If the lens was F4 in full open, calculates how many stops

needs to close in this lighting condition.  Canon measure actual light instantly,

when F-aperture was closed, then select the shutter speed).

The reason why other manufacturers are using this design was, to prevent

the use of a lens other than their genuine products.

(The ID of lens would direct a correction program,  such as to brighten up

the corner-fall-off of the wide-angle lens).

——–  — ( Cutty Sark in Greenwich ) ——— ( There was a Cinema Film Shooting at Old Royal Naval College )

On the beginning, in order to cut into the Nikon dominated professional

camera market, Canon designed their camera even capable to use with

Nikon lens.   Hence, in the early 70th, they sold a lens mount adapter to use

for Nikon lens.  (Later, when they gained popularity and their confidence grow,

they stop to sell this adapter). 

The First Gulf war was the turning point for the choice of professional camera,

as most of Nikon were stopped to work, thanks to the microscopic sand dust in

the desert.  Only the camera kept working was the Canon. —– As a consequence,

News Photographers changed to Canon.

Still, the tradition to allow the use of Nikon lens was kept by Canon, since such

as special 2000 mm lens which was made only by Nikon, Canon has to make a

provision for News photographer to use such special lens on their Canon body.

= hence, camera was designed to functions with the lens which has no Canon

ROM memory.  In other words they can work with any lens. 

So that, their camera, even Digital SLR can give enough exposure function except

Tv and Program Mode. = still perfect on AV Mode and of course with

Manual Mode.

Above all, with DSLR, we can check the result on the spot, and change

manual setting or exposure compensation on Av.

( Or, change ISO setting further).

——————————————————- ( At Painted Hall, Greenwich )

So, there is no problem to use Canon with a reading glass, plastic flat lens

(Fresnel lens, which gives utterly unsharp image 😀 ) —– even with

Pin-hole, while leaving all the exposure control to the Camera !

= Just use AV mode and adjust exposure compensation.

(Though, Canon 5D gives only up to 30 seconds on AV Mode, if you need

longer exposure to make picture brighter = increase ISO to higher setting,

or change to Manual Mode.

And if you need to have very long long exposure to make all the moving

things disappear, use lower ISO or use dark ND filter together.

Unlike on color film, the adverse effect of UV light  (which causes blue cast),

doesn’t affect the color on Digital camera.  But never have a direct sun in

the image.  Without having any protective glass lens which blocks UV light,

it may damage the Image Sensor).

————————————————————— ( At Greenwich Town )

And, to do this kind of creative shooting, you need to pay attention to

[Good Common Sense] such as, to use View finder cover to block the

stray light from the back.  

And use good black paper for making Pin-hole, and make sure, pinhole

should be clean round hole with no paper floss messing on it.

And DO MAKE SURE, keep everything DUST FREE. 

Wash your hand before hand.

= a dust particle got onto the Image Sensor is very tricky to clean.

Your acute mindfulness was required.

——— ( Sake of photo, Pinhole was placed on EOS RT body )—– ( To make a perfect hole, it was made on a smaller

———————————————————————————————- piece of thin metal and attached in the center )

A paper with Pinhole, will be stacked on the lens mount of the body by a black

PVC tape to seal-off the stray light.

The Canon DSLR camera has the depth = Flange-back (Lens mount to Image

Sensor) 44 mm, therefore the field of view is the same as 44 mm lens. 

And if you use an Extension Ring and stick the pinhole further away from the

body, effectively it would give you telephoto images.

In the most of the case, (as a fine sawing needle has a diameter about 0.5 mm)

the size of this hole is equivalent of F90. (With a focal length of 44 mm lens,

if the diameter of the lens was 44 mm, it would give effective F-aperture F1,

hence, 44 /0.5 = 88 = about F90)

—– I’ve made it less than 0.2 mm = F250.  Instead to use a paper, I used thin

aluminium panel of a Drink Can, and pierced it with just a tip of the needle.

The smaller the hole, it would give sharper image though, the optical effect of

Diffraction will scatter the light, it can not give sharp image like an optical lens

anyway, but on the other hand, it gives pan-focus. 

(The hole doesn’t necessary in the center = You may put it far side and take

picture always one half, like top-end.  Or to put TWO, to make double images,

or one with color filter and so on, there are endless possibilities,

still cost nothing.  😀 )

—– (The samples of 3-PINHOLEs photos with each Red, Green and Blue filter)

—–

—– It would be a fun to play with a camera in open-minded way.

(Try it and find new play ground in photography  😉 )

[]

Aluminium-Panel Sculptures / Suppon-pon and O-Shiri

Even though many people still looking for the Dragon image, I rather like to put much more

warm-blooded human-like figure of which I just found an old photo of them when they were made.

( In fact, I’m getting bored with the Dragon images which has been requested by the readers. 😀 )

If you object its part of anatomies = it’s a sign of your mind has been stacked with it = it’s all

in your mind = relax, take easy and have a fun-loving mind, instead.   After all, it’s just a dented

aluminium panel, isn’t it ? —– Nothing more than that, and harmless.    Ha ha ha.  😀

In fact, Full-frontal figure named [Suppon-pon] (after Japanese slang) above was a challenge, how

simple drink can sculpture can be made realistic figure,  and the right, named [O-shiri] was made as

a kinetic sculpture which wobbles its bottom with motorized mechanism, though within a day, its metal

cracked and broken = it needs to be made by the good spring steel with a proper heat process.

Because, the matter in the Zen is, a Zen practice on practice ! —– Let’s Just Do It !

How Zen it is, you will see.  (and see the fun)

I’ve been telling the people, who asked me how those aluminium figures were made = I made them

by just pressing a thin metal, like Shiatsu. ( but, quite laborious endless pressing =

hence, it was a Zen practice ! ) as you can see the photos above, they were just a drink can.

Simply, if a thin metal was pressed, metal will be bent = to cut and bend the metal piece to a shape

wanted is, what all about the aluminium panel sculpture.

If you like to make it as a nude figure, make its shape as a nude figure, as simple as that.

So, when you got flat metal out of drink can, place it on a half soft surface and press it with something

round tipped stick or your finger = you can have  the effect. ( = here, you will see the result of

pressure = how unmistakably correct,  the Buddhism teachings are.   😀 😀 )

If the base was too soft, metal may not be bent but just sink all together. You need to try and find the

best suited material = I found, a cork place-mat has right softness. (and a Telephone book as well !)

The size of a round tipped stick to push the metal panel may need to have several different sizes

—– here the photo of the use of the tool I’ve improvised and made for this purpose.

Observe and use your common-sense and try and try again.  The solution can only be found by doing.

Thinking makes no result, but only the action does.   And only the result counts.

If the resulting shape was not what you wanted = make it from the scratch again (and again).

If you run-out of a can, you don’t need to drink another beer = look around the street, you will find

another can  (can be tons of them.   😀 )

(Obviously, this practice (Art ?) cost nothing = Zen and Spirituality is absolutely incompatible with money)

The more you try, the result you get will be the better.  Don’t be impatient.  And keep doing.

Just sweep the garden, Churi-pantak (Shuri-bantoku) needed 10 years of practice to get it perfect.

In fact, behind of my pieces (as the best so far, in the photo) I’ve made many failures which I’m not

showing to you. 😀 —– It was just a process to get it right = might be called as a Pathway.

To get the best out of one’s life is what the Buddhism was intended for, 

not for sitting idol and talking empty mambo-jumbo.

The tools had its own history of the evolution = from a round bottom of Fizzy drink CO2 Gas bomb

to a Bearing’s ball mounted shaft (for smoother fine movement).   And, the roller disks which would

make furrow or smooth curved line.  Utilize anything with the creative approach.

The better designed tool would give easier work and the better result.

—– Of cause, I know you would say “What all those fuss for ?”— nothing.    What’s wrong ?

Do you think, Do I needed to have a purpose,  such as to become famous and rich with those works ?

Oh, c’mon.  Don’t be greedy.  It’s just a beer can. = Utterly useless things.    ( Priceless ?  😀  )

I wouldn’t ask another technician to make Diamond studded Skull for greedy money-making scheme =

In here, to make it or its effort itself was the purpose.  Therefore, I’m making

everything myself, for myself.  = (Selfish ? —– I don’t think so.  I’m just dealing with this piece, which

is nothing to do with anybody else.  I was just seeing this piece of metal getting its own shape. = work for

something purposeless  for the sake of its own sake, is nothing but the selfless act = Act for act.

So, this is my Zen.   ( If you couldn’t understand why this is the Zen, think why

Master Boddhi Dharma opened Shaolin-Temple using martial art as a teaching tool,

and why the Tea-making is a Zen. —– Convinced  ? )

___/\___

—

OFFENSIVE — What ? ? ?

How interesting, after more than a year, some clicked LIKE but non ever clicked Don’t like, or

never received even a single negative comment —– my You tube video clips was identified as

[Potentially Offensive] —– What ? — I beg your pardon ? ? ?

Since I couldn’t have any more information, I don’t have any detail, which one, in what extent ?

[]

Potentially offensive, dangerous etc can be said against anything, by anybody —–

Yes, Baseball bat, Cricket bat are [potentially] dangerous killing weapons, as the facts showed that they

have been actually used to kill a man.

Well manicured nails are [potentially] dangerous weapons, it could cause an injury which may needs

hospital treatment, where the spread of life threatening MRS is a common feature there, and a person

who contracted such deprecating illness could [potentially] die.

But those are the statistical probabilities = may be [potential] one in millions.

The notion of [offensive] came from the imagination = to make a specific imaginary

connection to something they imagined socially or personally , what-so-ever unacceptable,

even just for a single person.    If one person felt offended, it’s mean it is Offensive. —– Is it ?

Isn’t it a trouble of the person’s own imagination ? —– or obsessive delusion kind.

[]

While displaying thousands of killing scene video-clips from Arab springs etc, I’m nothing but amazed by

so-called [You tube community’s] mind-set.  Who are they ?

If you search in You tube while typing Virtual Woman, Funny image or Condom, you will find the

thousands of dubious images or really low grade innuendo.

As I wrote in my post featuring my sculpture Virtual Woman, I created this wire mesh torso to see how

our psyche works. —– and I made it rotates like a computer cage design like a virtual image in a screen.

—– Any 3D body-design in the computer starts from a naked body, of cause.

Putting a skin, costume comes after.  Feel explicit image out of wire mesh is a really mindful imagination !

—– Or, was it because, it looks like a human barbecue ? — “Juicy and succulent” Ha ha ha 😀

Incidentally, I saw the lords of looks like dead naked bodies in the dark basement of latest

Secret Cinema’s event at St. John’s Street, London. They looked pretty realistic in its shape though,

they were made by plastic films and shredded paper. —– so, how a twisted metal mesh can be offensive ?

[]

Or, are they talking about blowing-up a condom ? —– Oh, c’mon. It’s nothing new.

Hundreds of You tube images blowing up a condom.

——— ? ? ?

Or, are they trying to make a fuss, in order to stir a news, expecting me to make a mountain

out of mole hill ?  Any publicities are good for them.

Fortunately or unfortunately for them, I’m a Zen Buddhist.

I’m not seeking a trouble which wouldn’t be an exciting fun.

Even HM the Queen treasuring the drawing of penis in her collection and Tracy Ermin’s open-leg

drawing of her genitals are the ART,  so what offensive my sculptures —– is it, because they are

the great Leonard DaVinci and Tracy Ermin, but I’m just Yoshizen / Kinetorori = M m m,

Isn’t it very discriminative OFFENSIVE view ?  Isn’t it a contempt to Offend me ?

[]

Whether, it was their joke or not, I haven’t received any formal notice (they got my real Email address)

nor my video-clips have been removed (— yet ?) by them.

So, watch the space for any fun-full out-come. 😀

___/\___    Peace for the World and the Cyberspace.   Ha ha ha.

– – –

PS:   After I have blogged here and Tweeted,  You tube withdrawn their comment.

—– Though, I have no idea whether they did read this blog, or just gave a second thought.   😀

 —

Japanese New Year’s Card 2012 (2) / DRAGON IMAGE

It’s interesting to think, how the ancient Chinese got idea of the Dragon. —– ? ? ?

Their Dragon doesn’t looks like a Snake neither Lizard or Crocodile, but an element of all those,

except its head and the face (some said, that the head with its mane was inspired by a hose)

Still, its image and the myth has been in their culture thousands of years. —– where it came from ?

[]

Neither I know the origin of the Western Dragon which got separate wings.

As Chinese Dragon can fly without having the wings, it is even more mysterious than a looks rational (?) western

Dragon. —– still, the Western Design doesn’t anatomically convincing  (in comparison to the wings of a Bat).

So that, when I designed my Flying Dragon, I didn’t put fore-legs to it.

Anyhow, it is a pure imaginary existence, what so ever the design it is the design, as long as it looks fearsome 😀

The Flying Dragon which got 3m wing-span,  flaps its wings and kicks the legs.   And the head (right photo) got

blue fire in the eyes and the mouth blow a fire —- well, supposedly.  Yes, it did frighten the people    😀

( The reason why the wings are not fully covered was, because of the air resistance — motor wasn’t big enough)

The next photos are the Wire Dragon called Dino  🙂   Its moving image is in the You-tube ;

—– http://www.youtube.com/watch?v=ZV0Oyl0B_0g    or click the Link on the right side-bar ( Associates )

I made this, when I was in the South Bank Uni’  Engineering Product Design, Master Course and

the identical (well, more or less) twin is in their permanent collection ( indefinite on loan to them).

The graphic image (right) would be easier to compose for a card.

Lastly, this is the Try-Headed Dragon.  It moves the Heads like the Snakes.

The head was made by a beer can and the long neck is the shower hose.

—– Well, it’s still a kind of the Dragon, don’t you think ?

And the brush Calligraphy are all greeting word for the New Year which

may be composed with the Dragon image to make a New Year’s Card.

( Be sure, never put it, up-side-down or use it for tattoo stencil  😀 )

Rest of the work is up to you.

(I myself is not very keen to use Photoshop, which I learned when

it was a version 3,  and don’t remember how to use !   😀 )

(Left / Read as Gashow  / Congratulate the New Year )  ———–( Right / Read as Gei-Shunn / Welcome the Spring)

—————————————- (Middle /Read as Kinga-Shin-nen / Happy New Year)

Try work hard,  still,  it will be a fun —– it’s a pleasure to live a creative life   🙂

Making a Card would nothing to do your survival, in other words, it is purely for a sake of making card.

( Exactly same as me to create the Kinetic Dragon sculptures = they are utterly useless for my survival )

Nothing essential for the life, it’s mean, it is a light hearted selfless act = Act in Mushin.

Still, you need to work with full concentration (mindfulness) and do it in your best.  Otherwise the result

wouldn’t be an up to the standard.  If it isn’t good enough, try again and again.  You can perfect it.

This is the Zen in action.  Zen is everywhere.  In fact our dairy life is the Zen, provided

you live it in your best, with your mindfulness.

___/\___

—

Artist’s Party just went on and on and on —–

Last week-end there was an artist’s party which turned out to be pretty big fantastic party.

Artists though, it’s not a fine-art kind, Stage designer, Sound engineer, Film (video) maker, Photographer,

Graphic designer, Costume designer, DJ  etc etc, —— in certain extent, they are working craftsman.

Hence, talking are not abstract theory but more practical, technical kind which I like more.

As it was a party, my main aim was to have an enough exercise (generally called dancing)  with Jungle

or German base kind of music.  And I went there with Camera and my Rotating LED dancing costume.  😀

As the theme of the Party was the God, Goddess, kind  🙂  some had appeared with rather fancy attire

and a make up (and some had gone pretty far —– though, for the Stage, Film people it must be easy business.)

Whole house has been decorated with huge print out of Godly figure and the decorations.

Egyptian to Roman, even a Japanese mythical Goddess of Amateras  !

And of cause,  looks not necessary Godly figured folks as well —– ( So-called good earthly creatures  😀 )

A specially designed strange furniture (?) for the party was = like this in the photo. (You put name it)

Which can be climbed and parched on it = rather comfortable to sit on.

Where such imagination came from, and the effort to build this, from scratch,  just for a fun for

one night party ! —– This is the demonstration of an Italian extravaganza !

As in a guise of Venerable Holy Man Yoshizen  😀    I drunk orange juice.   (I brought Apple juice, since I hate Apple

though, it disappeared, hence I had to settle with orange ) —– was not a big issue though.

And so on —– so on.

Since the house literally having Audio engineer, DJ-in-residents, their set up was professional.

And the friends came to see and dance, expecting to have it in professional standard.  🙂

Good, good.  Excellent  🙂

And it went on and on and on —— till next morning.

This is what the Party should be.  And it was a terrific fun.

___/\___  ( It doesn’t contradict  Zen  😀  /  Far from it,  just giving a fun for hundred of the guests,

—————-pay so much effort and the work, and perfected it —– is nothing but the Zen.

—————-Believe me, as Yoshizen is saying so.   Ha ha ha  😀  )

—

Simple LIFE / Humble LIFE

Simple life —– well well well. I’m well aware that I’ve been using this word rather casually and often.

After all, Zen Buddhism is not what we talk or think, but practice.

So, in practice am I having simple life ? ? ? —- In one glance, it is untrue.

I’m doing too many things and being involved too many activities —– often not necessary they

are what I’ve intended.  They just happened and came to my hand.

But, this is the most important core teaching in the ZEN.

When I do anything I only do one thing ( at a time ) = because of I’m doing only one thing,

it is very simple.   Just Do It.

non

Then Humble Life —– ?   This is definitely true on me.    Anyone can see it in distance.

May be indistinguishable from a vagrant.   Far remote of any concept of fashion, still strangely people says,

they can find me in the cloud easily since I’m looks always the same 😀

A secret behind of this, I’m buying the same cloths, some time many at once —– my signature attire of

white pullover, I got almost identical 5 of them.

When I buy underwear or socks kind, I buy many of them in one go, or after gave a close look and when

I found it is a good product, I go back to the shop and buy up many of them.

Like the socks, if they are all same made, I don’t need to have a trouble to find a matching pair 😀

After all, I’m lazy to think what to ware ( I don’t care the package, the matter is the contents ) —– if

the package is the same, I don’t need to think about when I put.   It’s true isn’t it ?

Laziness lead to the simplicity.     This is what the humble life become simple life. Ha ha ha. 😀

non

While having much enough to think about for a project or design, I wouldn’t like to spare the time to

mundane things —– sorry I wouldn’t pay much of attention to the room decoration.

Zen wouldn’t chase two rabbits, since we got only one life.   ( And we don’t wait to have another

life to finish the project —– as nobody ever did = nobody ever enlightened in the next life, 

since no such things ever exists in this world —– even Dalai Lama had to learn the Buddhism

from scratch = where all the wisdom supposed to be accumulated in his previous 13 lives ? )

So, Just Do It,  while it is in your hand.

___/\___

non