Yoshizen's Blog

Reset the Canon body

Reset-DSC06350

It seems, when people use Sigma lens on Canon DSLR camera, sometime this trouble would happen = the camera start to show this sign and the lens stopped to work despite the other Canon lens was still working.

Even though the electronic contacts between the body to lens were clean and perfect —– camera just stop to recognize the lens and block all the functions. — As a matter of fact, there may not be any trouble exists, still the Canon body stop to function (as it was programmed so = to give a hard life to Sigma.   😀  ) 

Don’t panick.  You (and your Sigma) would be OK !  The remedy to this kind of trouble in the most of the electronic gear is the same (= same as your PC). = Just reset the gear / Switch off and restart.  In the Canon DSLR case, while that Sigma lens was mounted on the Canon body, switch off and take the battery out — after a while put the battery back and switch the camera on. —– You see !    Have a nice day.  Have a good shooting.

.

%d bloggers like this: