Junk as a Macro lens
Camera lens is the optics = even if it was broken and ended-up in a bin,
lens can still function as an optics. Convex lens can project an image.
This lens was a Canon zoom lens which I got free from a camera shop.
Top left of the photo above, is the rear group of the Zoom lens which function
as a convex lens to project the image. Convex lens mean, it will work as a
magnifying lens and in reversed direction, it could be a good macro lens.
—– for a fun, I tested this lens unit to take macro photo.
(on the photo, you can see a L-shaped plastic bar on the lens-unit, there were
three of those which held the lens unit in the position though, such flimsy
plastic couldn’t survive a shock and easily broken but impossible to repair, it
was the end of the life ! — replace whole unit may cost half of the lens price.)
For macro photo, lens unit was stacked on a mount adapter ring using sticky
plastic-pate, and it was mounted on
Canon 5D through 2 sets of Extension
tube. (total extension was 125mm)
—– After few shots, I found the
sharpness wasn’t good enough,
so that, I closed the Iris somewhere
half-way. (Photo left)
This Aperture / Iris has a
stepping motor built inside
= So, I’m going to make electronic circuit to drive it.
And, this is how the photo was taken while using a small flash-light.
The photo wasn’t too bad —– considering the lens came from a bin. 😀
This lens unit act like a 38 mm lens, so that it can produce about x5 macro
image on this extension. The photo above was a clopped part-enlargement.
(effectively, x10 magnification = 3.6 mm object was on the 36 mm frame)
Originally, this was a rear half of the good zoom lens. —– Think about, it
is a magnifying glass of £100 cost = it got to be high quality !
[]
Parts Box ?
To make, modify or repair something etc. what ever to do, it’s always need
to have all sorts of components or parts. —– strange urban myth was that
I’m a kind of professional, so, I have a professional class storage / drawer
box to sort the components. And people are believing that I got a workshop.
Wrong ! I’m a non of professional. Therefore, I’m keeping the components in
the most unprofessional way.
= My storage box for the parts is “plastic Ice-cube tray” used in a fridge. = This is
the most compact and convenient way to keep the small parts in order.
(And cost virtually nothing. 🙂 )
Even just the screw, there are many different sizes, starting from 1mm~.
About the same size but old 1/8″ doesn’t match to metric 3mm screw.
So, they has to be kept separates, ETC, ETC !
Situation is far worse in the electronic front. —– if I got to store everything,
I need to have a space, size of a shop.
So, I keep the items handy I most likely to use, in the Ice-cube Tray.
I don’t remember when I got this and started to use. —– I might have
brought those from Japan = it’s mean, I’m using this, past 40 years !
For me, the matter is its function. = as long as it fulfils my needs, that’s enough.
And, even more crucial matter is “What I do with those components”.
Parts are just a matterial. Part wouldn’t creates anything. = Thousands tons of
cement is not a building. And the beautiful way to pile-up the cement neither
form a building. —– Building would be counted when it was elected.
So does the component here, when it became a part of a finished product,
it would be counted as a meaningful existence. (but thousands end-up in a bin)
[]
Small Repair
In our daily life situation, when
something break down and need to
be repaired, in most of the case it is
a loose screw or loose connection
kind of very simple fault.
In certain extent, it is true that the
everything break and lost = natural
were ant tear surely eat away its life
though, in the same time if we pay
reasonable attention such as to give an oil or tighten the screws etc, the things
can last quite long time. Like my Electric Kettle, it is more than 30 years old.
In fact, there is little possibility of a Kettle to break down unless switch
it on without a water thence either whole Kettle melted down or burn-out the
heater element. It’s mean, if we do “Always put only necessary amount of
fresh water and boil” = Kettle was designed to last for ever in this condition.
[]
But a kind of machine which has a motor inside, its vibration often cause a
break down. The worst was the worn-out of the motor bearing (due to a rack
of care = dust, and rack of oiling) otherwise, a component became loose.
Photo on the top is a control board of a motor tool in which you can see an
exploded component called Triac.
The vibration caused a component to come loose and caused a short circuit.
The damaged parts was visible and the repair was simply to replace and fix them.
The photo above is a control board of a back-up battery power supply.
Right side in the left photo, you can see a yellowish box shaped component
was burnt and exploded. From the shape and the size, it’s easy to see that it
was the same one in the left side, which said 100mF = It was a capacitor.
Remove the damaged one and test with equivalent component, if the whole
unit works (it’s mean no other component has been damaged), it’s the repair.
In this very case, the damaged capacitor was replaced by the equivalent
capacitor (in the photo right). —– But, if no obvious damage was seen, then
complicated trace and analysis game starts. It’s mean, this is not a small or
simple repair. —– Some time it was called nightmare and often
it is cheaper to buy new one. 😀
][
(That) Early Cherry again
I lost the count how many times I posted the photo of this Cherry tree.
Because of this tree having the flower (almost) always, I talked
about many times, often with amazement.
She kept the full bloom from October to the next may before. But
it was a bit low-key in last year —– still showing 10 or so flowers
always since last October and she would be in full bloom soon.
So that I even dubbed her “Perpetual Cherry”. Despite watching her in past
3, 4 years, still I’m not wise to tell why this tree has the flower out of season.
—– Genetic ? = Type of variety such as crossed with Winter Cherry ? or
just because the freak weather had triggered her to miss-judge the timing ?
What ever the cause, the weather these days are enough for her to bloom.
(My worry is that her branch seems to be very thin —– was that because of
the energy has been directed to the flowers and not much went to the body ?
= we may need to give a lots of fertilizer to her ! )
[]
Too Early Magnolia
When I saw this Magnolia, I was even annoyed by it.
It is definitely wrong — gone too far.
Cherry can flower earlier but not this variety of magnolia.
Normally, this tree flowering after the Cherry — in May.
Without a reason, I have strange soft spot to ancient plants.
Cycad, Tree-fern, Horsetail, Ginkgo, Yew, Monkey-puzzle, Magnolia, Lotus, etc.
For them to survive hundreds of millions of years, they must
have a supreme wisdom printed in their gene ! —– I feel awe !
So, what’s wrong with she in this time ? ? ?
Those fuzzy images were taken by Wide-angle Pinhole on Canon 5D Mk-III.
Moss
Wet but not too cold = who most enjoy this weather must be the Mosses.
And nobody would say otherwise. So, no word here.
(In fact, I do know them very little any way. 🙂 )
Three photos above were taken by Zeiss 85mm F1.4 with close-up lens.
Rest of photos were taken by Canon EF Macro 100mm F2.8 with Close-up lens.
[]
Electronics in the Lens
Lens of today’s hi-tech DSLR was connected to the camera body
on its bottom, mechanically and electronically.
Except the Canon EF Lens (for EOS), the Aperture lever has to be
pushed from the camera side, therefore when the lens was used in
rivers direction, either the Lens become completely manual (if the
Aperture ring was still there) or just out of control. — But Canon’s EF
lens has its own stepping motor to drive the Aperture, hence as long as
they are electronically connected, the Aperture will function as normal.
(If not connected, there is no way else to use Aperture but fully open.)
To have an electronic connection, we only need a simple cable !
So, I made this adapter, long time ago, in fact soon after the Canon
introduced their EOS camera. ( yet, it was a film camera then.)
—– the connection between the camera and a lens was made by two
sets of male and female contacts. = I made and mounted them on
a Body-cap and a Lens-rear-cap, and jointed them with a cable !
= With this cable, even when a lens was held in angle, still the
lens function like as normal.
I could use this on EOS 620 and RT with EF 28 mm lens for
experimental close-up with tilted lens etc —– though, few days
ago, when I tested this again, with my latest Canon gear,
I found, 5D camera refused to work with this. 😀 😀
[]
On the appearance, it was just an 8p connections and two of them
were the ground line, and the signal lines for each direction =
only 5 lines seems to be used though, as long as all 8 lines were
connected one-by-one there should be OK, other than the trouble of
impedance or magnetic interference kind, caused by an extended wires.
(Those interference might be used to detect unauthorized connection.
And if anything odd was detected, Camera CPU may check the Lens’ ID.
—– If no answer was received, then camera stop to work normal. 🙂 )
[]
These days, the lens transmit their own ID for their own graphic program
to correct the individual characteristics of the lens, such as the aberration
or corner fall-off of the light. = To correct the Chromatic Aberration,
Red signal from the Pixels would be shifted inward and Blue signal would be
shifted outward accordingly ! (So, the picture become even sharper ! 😀 )
Though, I’m not necessary happy with this kind of approach —– once we
start to rely on computer graphics, we may no longer need to have such as
ultra wide angle lens or fisheye-lens, as we can get the same effect by
stitching the photos or use distorting graphic effect or “filters”.
Graphic design is a desc top process, it is not a photography on the spot.
Photography is a Site-specific, Moment-bound “interaction”
not just a visual effect.
= What “I” witnessed and how I lived with its moment IS the matter.
If the artefact left was a fake, the person and the life was a fake.
[]
At a moment, I’m quite amazed how Canon 5D could detect
“something odd” about this cable, and teasing me while showing
photo-number [50] in the view finder, instead of [950] on the
camera top, and not showing “Focused” indicator etc.
—– not malfunction but maliciously falsified on purpose. 😀
(It takes time to debag and hack-into the camera. )
[]
Too early Spring ?
In the day time, it was so sunny and warm —– so,
one of my friend came over and we popped out to the park.
Though every where, the grass was water logged by the record amount
of the rain (500 mm for this winter) still, Crocus started the flower.
Then we found this flower. —– ? ? ?
It can be a cherry but my guess was a Peach —– too early still.
Those flowers may not be too early.
Left seems to be an Apricot (Japanese equivalent of Ume) and
the right Photo seems to be a Kanzakura (Winter Cherry).
Still, I don’t think even now is not an appropriate time for
this Haney Bee to come out.
Crocus seems to be the second earliest flower to come out.
= First one is the Snow-drop, then after Crocus, Daffodil start to flower.
In distance, I realized that there is a quite tall Winter Cherry.
—– but instead to walk-up, I took photo of it with 500 mm lens. 😀
Like last year, this Spring-like Climate might be a false and the cold
spell may back again —– any how this is the England !
[]
Spiritual Deptford
In the east London, whether it is north or south of the Thames, the
churches there is quite big and well built. It is the luminescence of how
the area used to be rich with its industry and the people working there.
Of cause, the east London was the Dockland =
center of the ship building and the sea trade.
But I guess, the Anglican Church, such as in the top photo may not having
so many attendance now, still the “Cathedral” photo above may attracting
a lots of worshippers. (I didn’t ask which sect —– may be Evangelistic.)
So, it seems this town is having a quite fanatic followers of
the Christian persuasion.
M m m m ?
I’m not necessary convinced that the spirit was made buy glittering
plastic though, it is not my business or the matter I should go into.
—– I rather feel, this Deptford Creek must have seen and seeing
the change of the time and carried a scum of human life away,
for hundreds, thousands of the years
—– this is my spiritual response to this town.
___/\___
[]
Deptford — Art or Odd ?
In south-east London, just before the Thames River reaches to Greenwich,
it is the Deptford. Unlike the posh Greenwich, this part of Lewisham is
rather poor area = hence lots of artists (I guess, rather poor artists) are
living in this area = And it creating very distinctive atmosphere here
though, I wouldn’t necessary say it is artistic, but definitely it is odd. 🙂
Next to the Deptford open market, the Albany Theatre is
one of the center of the Community Art activity.
But half of the market is a Flea Market = or some might say junk heap.
Therefore, to distinguish Deptford’s “distinctiveness” = whether it is
art or junk is a difficult task. 😀 Photo above left is — can you guess,
it’s a tattoo shop !
The area having quite a number of Vietnamese population hence
many Chinese-Vietnamese restaurant as well.
And number of Charity shops (or junk shop). —– Important point is,
they were sold to the grown-ups, not to the children.
On the table, Permanent flower in a glass jar = What a great idea !
—– I’m wondering, who got a courage to cut a hair there ?
—– or the population here loves a joke so much ?
And so-called Laughing Buddha (Chinese Putai = Taoism figure, nothing
to do with Buddhism) must be a warning of obese in the restaurant. 🙂
They are the Wedding cake kind ! = What a fantastic idea again !
So, where ever you go, ART (sort) is everywhere.
This is what Deptford is !
(Photo Right is, the entrance to the Site-office of construction site !
= not a joke ! )
[]






























































9 comments